Hydrodynamic instability of premixed flame propagating in narrow planar channel in the presence of gas flow

The paper analyses the hydrodynamic instability of a flame propagating in the space between two parallel plates in the presence of gas flow. The linear analysis was performed in the framework of a two-dimensional model that describes the averaged gas flow in the space between the plates and the perturbations development of two-dimensional combustion wave. The model includes the parametric dependences of the flame front propagation velocity on its local curvature and on the combustible gas velocity averaged along the height of the channel. It is assumed that the viscous gas flow changes the surface area of the flame front and thereby affects the propagation velocity of the two-dimensional combustion wave. In the absence of the influence of the channel walls on the gas flow, the model transforms into the Darrieus–Landau model of flame hydrodynamic instability. The dependences of the instability growth rate on the wave vector of disturbances, the velocity of the unperturbed gas flow, the viscous friction coefficients and other parameters of the problem are obtained. It is shown that the viscous gas flow in the channel can lead, in some cases, to a significant increase in instability compared with a flame propagating in free space. In particular, the instability increment depends on the direction of the gas flow with respect direction of the flame propagation. In the case when the gas flow moves in the opposite direction to the direction of the flame propagation, the pulsating instability can appear.     

Micro/Nanoengineered α-Fe2O3 Nanoaggregate Conformably Enclosed by Ultrathin N-Doped Carbon Shell for Ultrastable Lithium Storage and Insight into Phase Evolution Mechanism

The Fe-based transition metal oxides are promising anode candidates for lithium storage considering their high specific capacity, low cost, and environmental compatibility. However, the poor electron/ion conductivity and significant volume stress limit their cycle and rate performances. Furthermore, the phenomena of capacity rise and sudden decay for α-Fe₂O₃ have appeared in most reports. Here, a uniform micro/nano α-Fe₂O₃ nanoaggregate conformably enclosed in an ultrathin N-doped carbon network (denoted as M/N-α-Fe₂O₃@NC) is designed. The M/N porous balls combine the merits of secondary nanoparticles to shorten the Li⁺ transportation pathways as well as alleviating volume expansion, and primary microballs to stabilize the electrode/electrolyte interface. Furthermore, the ultrathin carbon shell favors fast electron transfer and protects the electrode from electrolyte corrosion. Therefore, the M/N-α-Fe₂O₃@NC electrode delivers an excellent reversible capacity of 901 mA h g⁻¹ with capacity retention up to 94.0 % after 200 cycles at 0.2 A g⁻¹. Notably, the capacity rise does not happen during cycling. Moreover, the lithium storage mechanism is elucidated by ex situ XRD and HRTEM experiments. It is verified that the reversible phase transformation of α↔γ occurs during the first cycle, whereas only the α-Fe₂O₃ phase is reversibly transformed during subsequent cycles. This study offers a simple and scalable strategy for the practical application of high-performance Fe₂O₃ electrodes.     

Monodisperse silica nanoparticles coated with gold nanoparticles as a sorbent for the extraction of phenol and dihydroxybenzenes from water samples based on dispersive micro‐solid‐phase extraction: Response surface methodology

A selective and sensitive method was developed based on dispersive micro‐solid‐phase extraction for the extraction of hydroquinone, resorcinol, pyrocatechol and phenol from water samples prior to high‐performance liquid chromatography with UV detection. SiO₂, SiO₂@MPTES, and SiO₂@MPTES@Au nanoparticles (MPTES = 3‐mercaptopropyltriethoxysilane) were synthesized and characterized by scanning electronic microscopy, thermogravimetric analysis, differential thermogravimetric analysis, and infrared spectroscopy. Variables such as the amount of sorbent (mg), pH and ionic strength of sample the solution, the volume of eluent solvent (μL), vortex and ultrasonic times (min) were investigated by Plackett–Burman design. The significant variables optimized by a Box–Behnken design were combined by a desirability function. Under optimized conditions, the calibration graphs of phenol and dihydroxybenzenes were linear in a concentration range of 1–500 μg/L, and with correlation coefficients more than 0.995. The limits of detection for hydroquinone, resorcinol, pyrocatechol, and phenol were 0.54, 0.58, 0.46, and 1.24 μg/L, and the limits of quantification were 1.81, 1.93, 1.54, and 4.23 μg/L, respectively. This procedure was successfully employed to determine target analytes in spiked water samples; the relative mean recoveries ranged from 93.5 to 98.9%.     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.     

Studies on oral bioavailability and first‐pass metabolism of withaferin A in rats using LC–MS/MS and Q‐TRAP

Withaferin A (WA) is one of the major bioactive steroidal lactones with extensive pharmacological activities present in the plant Withania somnifera. The absolute oral bioavailability of WA remains unknown and human‐related in vitro data are not available. Therefore, in the present study, the absolute oral bioavailability of WA in male rats and the in vitro screening of absorption factors by Q‐trap and LC–MS/MS analysis were conducted to explore possible clinical properties of WA. The developed and validated analytical methods were successfully applied to the pharmacokinetic studies and in vitro measurement of WA. The oral bioavailability was determined to be 32.4 ± 4.8% based on intravenous (5 mg/kg) and oral (10 mg/kg) administrations of WA in male rats. The in vitro results showed that WA could be easily transported across Caco‐2 cells and WA did not show as a substrate for P‐glycoprotein. Moreover, the stability of WA was similar between male rat and human in simulated gastric fluid (stable), in intestinal microflora solution (slow decrease) and in liver microsomes (rapid depletion, with a half‐life of 5.6 min). As such, the first‐pass metabolism of WA was further verified by rat intestine‐liver in situ perfusion, revealing that WA rapidly decreased and 27.1% remained within 1 h, while the content of three major metabolites (M1, M4, M5) identified by Q‐trap increased. This perfusion result is consistent with the oral bioavailability results in vivo. The first‐pass metabolism of WA might be the main barrier in achieving good oral bioavailability in male rats and it is predicted to be similar in humans. This study may hold clinical significance.     

Micro‐/Nanostructured Multicomponent Molecular Materials: Design,Assembly, and Functionality

Molecule‐based micro‐/nanomaterials have attracted considerable attention because their properties can vary greatly from the corresponding macro‐sized bulk systems. Recently, the construction of multicomponent molecular solids based on crystal engineering principles has emerged as a promising alternative way to develop micro‐/nanomaterials. Unlike single‐component materials, the resulting multicomponent systems offer the advantages of tunable composition, and adjustable molecular arrangement, and intermolecular interactions within their solid states. The study of these materials also supplies insight into how the crystal structure, molecular components, and micro‐/nanoscale effects can influence the performance of molecular materials. In this review, we describe recent advances and current directions in the assembly and applications of crystalline multicomponent micro‐/nanostructures. Firstly, the design strategies for multicomponent systems based on molecular recognition and crystal engineering principles are introduced. Attention is then focused on the methods of fabrication of low‐dimensional multicomponent micro‐/nanostructures. Their new applications are also outlined. Finally, we briefly discuss perspectives for the further development of these molecular crystalline micro‐/nanomaterials.     

Contrasting Response of Two Dipolar Fluorescence Probes in a Leucine‐Based Organogel and Its Implications

The microenvironments of a leucine‐based organogel are probed by monitoring the fluorescence behavior of coumarin 153 (C153) and 4‐aminophthalimide (AP). The steady‐state data reveals distinctly different locations of the two molecules in the gel. Whereas AP resides close to the hydroxyl moieties of the gelator and engages in hydrogen‐bonding interactions, C153 is found in bulk‐toluene‐like regions. In contrast to C153, AP exhibits excitation‐wavelength‐dependent emission, indicating that the environments of the hydrogen‐bonded AP molecules are not all identical. A two‐component fluorescence decay of AP in gel, unlike C153, supports this model. A time‐resolved fluorescence anisotropy study of the rotational motion of the molecules also reveals the strong association of only AP with the gelator. That AP influences the critical gelation concentration implies its direct involvement in the gel‐formation process. The results highlight the importance of guest–gelator interactions in gels containing guest molecules.     

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction combined with ultraviolet‐visible spectrophotometry for the determination of rhodamine 6G and crystal violet in textile wastewater

Polypyrrole‐magnetite dispersive micro‐solid‐phase extraction method combined with ultraviolet‐visible spectrophotometry was developed for the determination of selected cationic dyes in textile wastewater. Polypyrrole‐magnetite was used as adsorbent due to its thermal stability, magnetic properties, and ability to adsorb Rhodamine 6G and crystal violet. Dispersive micro‐solid‐phase extraction parameters were optimized, including sample pH, adsorbent amount, extraction time, and desorption solvent. The optimum polypyrrole‐magnetite dispersive micro‐solid phase‐extraction conditions were sample pH 8, 60 mg polypyrrole‐magnetite adsorbent, 5 min of extraction time, and acetonitrile as the desorption solvent. Under the optimized conditions, the polypyrrole‐magnetite dispersive micro‐solid‐phase extraction with ultraviolet‐visible method showed good linearity in the range of 0.05–7 mg/L (R ² > 0.9980). The method also showed a good limit of detection for the dyes (0.05 mg/L) and good analyte recoveries (97.4–111.3%) with relative standard deviations < 10%. The method was successfully applied to the analysis of dyes in textile wastewater samples where the concentration found was 1.03 mg (RSD ±7.9%) and 1.13 mg/L (RSD ± 4.6%) for Rhodamine 6G and crystal violet, respectively. It can be concluded that this method can be adopted for the rapid extraction and determination of dyes at trace concentration levels.     

Janus 粒子在环境检测领域中的应用

Janus 粒子,也称为阴阳结构粒子或两面性非对称粒子,是指表面上具有两种或两种以上不同化学组成或性质的不对称粒子。目前,Janus 粒子因其独特的结构和功能已经逐渐成为生物医药、催化、材料以及防污等领域中的新型功能材料。在环境检测领域,Janus材料亦因其特殊的光学、磁学及电学性能,为提高检测灵敏度、选择性和稳定性等提供了新的研究方向。基于此,本文主要讨论了Janus材料在环境检测方面的特点、优势和相关应用。最后,本文基于本课题组的研究经验以及工作中所面临的问题,对本领域的发展和未来的研究方向提出了展望,以期对本领域的未来发展提供指导。